Amplified 12" Flat-Bottom Bass Cylinder
Product highlights
12" 120 Watt Amplified Flat Bottom Bass Cylinder w/Grill
Learn more about the atb12atBest selling similar products
• 8" Amplified Loaded Subwoofer System
• 120 watts RMS (360 watts Peak)
• Built-In amplifier
• Variable bass boost
• Speaker-Level Inputs
• EBC wired remote bass level control
(14)
$199.95
List price $219.95
• Enclosure with 2 10" TB Series Subwoofer
• Loaded with active CompR woofer and passive Reflex sub
• 400 watts RMS (800 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 10-5/8" L x 17-1/16 H1 x 10-3/4 H2 x 16-9/16" W2
(2)
$399.99
List price $429.99
• Enclosure with 2 8" TB Series Subwoofer
• Loaded with active CompR woofer and passive Reflex sub
• 300 watts RMS (600 watts Peak)
• Final Impedance: 4-ohm
• Dimensions: 8-1/2" L x 17-1/16 H1 x 10-3/4 H2 x 12-7/8" W2
$299.99
List price $329.99
• 8" Amplified Loaded Subwoofer System
• 50 watts Peak
• Built-In Class Amplifier
• Speaker-Level Inputs
• Remote control sold separately
• FAST-9999 and FAST-BTAH harness included
(26)
$199.99
List price $249.99
• Enclosure with 2 8" TB Series Subwoofer
• Loaded with active CompR woofer and passive Reflex sub
• 300 watts RMS (600 watts Peak)
• Final Impedance: 2-ohm
• Dimensions: 8-1/2" L x 17-1/16 H1 x 10-3/4 H2 x 12-7/8 W2
$299.99
List price $329.99
• Ported enclosure with 1 12" DST Series Subwoofer
• 250 watts RMS (1000 watts Peak)
• Final Impedance: 4-ohm
• Dimensions: 26" L x 26" W
$279.99
List price $320.00
• Enclosure with 2 10" TB Series Subwoofer
• Loaded with active CompR woofer and passive Reflex sub
• 400 watts RMS (800 watts Peak)
• Final Impedance: 4-ohm
• Dimensions: 10-5/8" L x 17-1/16 H1 x 10-3/4 H2 x 16-9/16" W2
(1)
$399.99
List price $429.99
• 10" Amplified Loaded Subwoofer System
• 100 watts Peak
• Speaker-Level Inputs
• RCBM-100 remote control sold separately
(5)
$279.99
List price $369.99
• Bazooka Non-Amplified 6" Ported Bass Tube
• Peak Power: 100 Watts
• 8 Ohm Impedance
• Paper Cone with Polypropylene Dust Cap
• Plastic Woofer Grille
• 1.5" High Power Voice Coil
• Mounting Straps, Wire Harnesses and Hardware Included
(6)
$109.99
List price $149.99
Manufacturer:
Model Number:
ATB12AT
Weight:
45.00lbs
Internal SKU:
atb12at
Internal Product ID:
122
| 5 star |
|
67% |
| 4 star |
|
33% |
| 3 star |
|
0% |
| 2 star |
|
0% |
| 1 star |
|
0% |
| Durability | ||
| Value | ||
| Features | ||
| Design | ||
| Usability |
Great Starter Sub
Purchased this for my son's 1996 Mazda Protoge' fits in teh trunk and sounds good - he can disconnect it and take it out with minimal work when he needs to load up and head back to college
19 found this helpful
good deep bass
great bass, easy installation. Great bang for buck. Sounds great, looks great, going to get another!
15 found this helpful
Great Sub for factory System.
I recently had this sub hooked up to a factory system, and it sound OK. But, just remove the factory system and replace with kenwood unit using the sub pre-outs. There was a 180 degree character change for this sub. While running on the speaker inputs, it didn't sound that impressive, but with the sub pre-outs it booms. You can use this with the speaker inputs, but it really will flex it's muscles using the pre-outs.
14 found this helpful
buy it NOW
the only thing that sucks about it is the time it takes to get shipped to ur house. i recommend professional installation.
14 found this helpful
Sick Sub
This sub is perfect for every type of music. the volume is easy to control thanks to the remote. Not only does it add sound quality it also hits hard.
14 found this helpful
This tube hits hard
I just recived my tube and this tube hits hard. It has a great little remote that allows you to adjust the bass on the fly. Other than my issue I highly reccomend it if you are looking for a quick way to get bass this is it, good sound good deep bass!
12 found this helpful
Modern vehicles often require specific brackets, wiring harnesses, and mounting solutions. A fit guide ensures:
Whether you're replacing a factory stereo or upgrading your entire audio system, the Fit Finder eliminates uncertainty.
