180 degrees vertical swivel for various vehicles -- will adjust to your exact vehicle needs and accommodate any installation.
Waterproof design
Night Vision -- superior night vision quality
Anti-theft design for optimum security -- Recessed mounting holes for bolts to install into. Once installed, the bolts can only be removed from inside portion of vehicle.
5 people rated the Universal License Plate Frame with High Resolution Night Vision Camera Built-In VB21C-RV and gave it an average rating of 5.0 out of 5
Have to say the BOYO Vision VTL100 works great with no flaws. I used the same power for my head unit (radio) for the camera. This way, I can put the camera on anytime I want too, without having to be in reverse. Now, I can see those tailgators!! Had no problems installing at all.
Only issues I ran into:
1) The chrome is nice, but easy to scratch. I am going to get vinyl stickers to put on the frame.
2) The security bolts for the license plate were to difficult to put the nut on from the inside of the car. I had to use my OEM to solve this issue.
Other than those two minor issues, had no problems.
April 10, 2008
Perfect backup camera
Overall
Durability
Value
Features
Design
Usability
Review written by James from Ashland, AL
The instructions were weak, well the instructions are non existent. They showed the dimensions of the unit but that was it. But even with that problem the camera is awesome. Even with just the brake lights on at night it looks like daytime behind my truck.
Here is a brief install on my 2002 F250.
Was very easy to install, drill a hole thru the license plate and the bumper at the same time then remove the license plate screws and the plate. Then remove the plastic plugs that were holding the old plates screws from the bumper. Put the plate back, run the camera wire thru the hole in the plate and the bumper. Put the frame on the plate and use the supplied screws to mount it. There is an included gromet on the camera wire to make a good seal if you decide to go into your trunk with the camera wire. There are 2 wires and a video plug on the end of the cable, one red and one black. Red goes to a switched power source +12v and the black one is ground, then plug the video cable into your head unit.
There two ends to the long cable, one small one that hooks to the pigtail off the camera and the other hooks to the pigtail that goes to your stereo and power wires.
I know someone out there will want instructions, so now you have them :)
I love this site, FAST shipping and great products.
I gave the product a 4 in place of the all 5's I did on the other rating areas because even though it looks metal aka chrome its actually a plastic frame. So I think the durability may be an issue on a pickup truck where one steps on the bumper to get in the bed of the truck. But for a car it would be fine.
February 20, 2008
GREAT FOR TOWING AND PARKING A LARGE VEHICLE
Overall
Durability
Value
Features
Design
Usability
Review written by Anthony from Bakersfield, CA
THIS THING TURNED OUT BETTER THAN I THOUGHT. ESPECIALLY WITH THE NIGHT VISION. LOOKS LIKE DAY WHEN ITS NIGHT. WOULD RECOMMEND THIS TO ANYONE WITH A TAHOE OR LARGE VEHICLE. ALSO IF YOU NEED TO HOOK UP WITH A TRAILER. GREAT VIEWING ANGLE! WOULD HIGHLY RECOMMEND TO ANYONE!
July 26, 2007
GREAT
Overall
Durability
Value
Features
Design
Usability
Review written by kyle from Eugene, OR
This i installed this in the back of my truck and it great it was easy to install and worked great. this is a great camera
January 17, 2006
this camera is great
Overall
Durability
Value
Features
Design
Usability
Review written by Elias from Valencia, CA
this camera is great the 180 degree wide angle really helps and the installation was really easy i would recommend this camera to any one who needs a back up camera this is the answer to no more drilling the camera in to the body of the car.
